“Contact Us” for pricing!
The METTLER TOLEDO IND780 weighing terminal is a highly flexible terminal capable of supporting simple to complex, stand-alone to integrated weighing and control applications. A wide range of communications interfaces are available, including serial, Ethernet, USB, and a variety of fieldbuses.
Optimize the amount of visible information with the graphical LCD display. Configure up to four scales and a metrologically approved sum scale, then view one or all simultaneously.
The IND780’s multiprocessor design provides the fastest A/D performance at 366 Hz, with TraxDSP digital filtering for rough weighing conditions. Configurable softkeys permit single key press operation of important features and functions. The built-in predictive maintenance and diagnostics features help predict errors and plan scale maintenance, rather than react after a scale is already down.
- A simple operating system with an enhanced graphical display and SmartTrac™ – Improves the speed and accuracy of manual or semi-automatic operations, with three display modes that relate weight status to target graphically.
- An array of integrated functions – Including Step Calibration, CalFREE™, TraxDSP™ Digital Filtering and TraxEMT™ Maintenance Diagnostics Suite
- Multiple measurement channels – Allow concurrent scale measurement and control in a single terminal for hardware and engineering cost savings
- Internal target/setpoint I/O controls – Internal digital I/O for direct material transfer control improves speed and accuracy in weigh-in or weigh-out feeding processes
- Target Table – Eliminates the need for repetitive data entry by storing numerous target and tolerance records for over/under checkweighing or material feed control applications
- MinWeigh® – Ensures compliance and prevents inaccurate measurements by monitoring the scale for any weighments below a specified minimum
- Cluster networking – Provides remote terminal access over an Ethernet LAN network, for flexible distribution of control and data
Description
Specifications – METTLER TOLEDO IND780 Advanced Weighing Terminal
| Resolution | 1,000,000 divisions |
| Resolution (approvable) | Analog – 10,000e NMI, 10,000d NTEP; IDNet – varies with scale base, NMI, NTEP |
| Dimensions | Panel-mount: 220 x 320 x 105 mm (8.7 x 12.6 x 4.1 in.), Harsh Environment Desk/ Wall /Column-mount: 200 x 299 x 235 mm (7.8 x 11.8 x 9.3 in.) |
| Housing | Harsh: Stainless Steel; Panel: Stainless Steel Faceplate |
| Degree of protection | Harsh: IP69k; Panel: Type 4x/12 |
| Keyboard | 30-key tactile keyboard with numeric keypad, navigation keys, function keys |
| Display | Backlit LCD graphic display; 320 x 240 pixels; QVGA, 145 mm (5.7 in); active TFT color |
| Mounting options | Panel, desk, wall |
| Suitable platforms / weigh modules | Up to 4 analog scales (10 VDC ex. up to (8) 350Ω load cells, 2 or 3 mV/V) per channel, POWERCELL® PDX® and MTX®, IDNet Scale, X-Base SICS |
| A/D rate (int./ext) | Greater than 366 Hz internal; 50 Hz target comparison; 20 Hz PLC output |
| Digital Input/Output | Maximum 40 inputs, 56 outputs with internal and external I/O options |
| Interfaces | Ethernet TCP/IP, Com 1 (RS-232), Com 2 (RS-232, 422 or 485), USB |
| Options | Serial, Digital I/O, A-B Remote I/O, Profibus DP, ControlNet, EtherNet/IP, Modbus TCP, DeviceNet, TaskExpert |
| Applications | Standard process/transaction weighing, over/under checkweighing, filling, vehicle |
| Hazardous area approval | Class I and II, Div 2, Groups A-D, F, G and European Category 3 |
