Home > Industrial Products > MS-TS Analytical Balance

MS-TS Analytical Balance

Notice:This product is restricted to logged in users with appropriate permissions

The built-in security features on MS-TS analytical balances ensure results are always valid. Operators receive a warning if any problems are encountered or tolerances are not adhered to. Corrective actions can be taken immediately, avoiding costly reworking later.

LevelControl, MinWeigh, and automatic internal adjustment with proFACT support compliance with regulations. The ISOLog function maintains a record of all weighing relevant changes to the balance’s settings. For additional security, settings can be passcode protected.

The 7″ extra-large color TFT touchscreen display is operable through cotton, silicone, and rubber gloves. An intuitive user interface and 18 mm high digits bring comfort to your daily task.

Contact us for pricing.

Description

 

vfs120 fork lift scale

 

 MS-TS Analytical Balance Specifications

Technical Specifications MS104TS MS204TS MS304TS
Limit values
Maximum capacity 120 g 220 g 320 g
Readability 0.1 mg 0.1 mg 0.1 mg
Tare range (from … to) 0 … 120 g 0 … 220 g 0 … 320 g
Repeatability (nominal) (sd) 0.1 mg (100 g) 0.1 mg (100 g) 0.1 mg (100 g)
Linearity deviation (test load) 0.2 mg (20 g) 0.2 mg (50 g) 0.2 mg (50 g)
Eccentricity deviation (test load) 1 0.4 mg (50 g) 0.4 mg (100 g) 0.4 mg (100 g)
Sensitivity offset (test weight) 0.8 mg (100 g) 1 mg (200 g) 1.5 mg (300 g)
Sensitivity temperature drift 2 1.5 ppm/°C 1.5 ppm/°C 1.5 ppm/°C
Sensitivity stability 3 2.5 ppm/a 2.5 ppm/a 2.5 ppm/a
Typical values
Repeatability (at low load) 0.08 mg 0.08 mg 0.08 mg
Linearity deviation 0.06 mg 0.06 mg 0.06 mg
Eccentric deviation (test load) 1 0.1 mg (50 g) 0.12 mg (100 g) 0.12 mg (100 g)
Sensitivity offset (test weight) 0.2 mg (100 g) 0.24 mg (200 g) 0.6 mg (300 g)
USP minimum sample weight (5% load, k=2, U=0.10%) 160 mg 160 mg 160 mg
Minimum sample weight (5% load, k=2, U=1%) 16 mg 16 mg 16 mg
Settling time 2 s 2 s 3 s
Weighing pan dimensions (mm) ∅ 90 ∅ 90 ∅ 90

 

  1. According to OIML R76
  2. In the temperature range 10 to 30°C;
  3. Stability of sensitivity with proFACT self-adjustment switched on; s: seconds; a: year (annum); sd: standard deviation